If you’re searching for kitchen makeover cost near me, you’ve probably seen wildly different numbers. One source says kitchen renovation costs are $15,000. Another says $70,000 or more. Both can be right, depending on your kitchen’s size and what you choose to change. The good news is that number is more within your control than most people think. Below, you’ll find real cost ranges by size, what actually drives the price up or down, and whether DIY or hiring a pro makes more sense for your project.
Average Kitchen Renovation Cost in Staten Island, NY
The size of your space, the materials you choose, and the work involved can all influence how much the project ends up costing. If you’ve been comparing kitchen upgrade costs near me, here’s how kitchen size shapes what you can expect to pay.
Cost by Kitchen Size
|
Kitchen Size |
Estimated Cost Range |
|
Small kitchen (under 100 sq ft) |
$15,000 – $20,000 |
|
10×10 (100 sq ft, standard) |
$20,000 – $50,000 |
|
Large or high-end remodel (150+ sq ft) |
$50,000 – $70,000+ |
A 10×10 kitchen, which equals 100 square feet, is a common industry benchmark. It will give you a helpful reference point for comparing costs, even if your kitchen is a different size or shape.
Cost Per Square Foot
Another way to estimate your project is by square footage instead of overall size category. In general, Kitchen renovations typically cost $150 to $250 per square foot, depending on the materials and finishes you choose. For a 100-square-foot kitchen, that comes to roughly $15,000 to $25,000. This is near the lower end of the above range based on size, and it shows a more basic to mid-range renovation.
What Affects Your Kitchen Renovation Price
Even two kitchens the same size can have very different renovation costs. That’s because the final price depends on several things. Here’s what actually moves the number up or down:
Materials & Finishes
Prices for cabinets, countertops, and floors can vary a lot based on the quality you choose. Stock cabinets cost far less than custom ones, while quartz countertops cost more than laminate. The same goes for flooring, as tile is more cheaper than hardwood. If you’re trying to decide on countertop materials, we can help you figure out what fits your budget.
Labor
Labor typically makes up 50 to 60 percent of your total renovation cost. Licensed plumbers and electricians in New York City charge more than the rest of the country. For a full renovation, the cost can be much higher than the national average.
Appliances
New appliances can range from $100 for basic models to $3,400 or more for high-end options. A full matching package, like a fridge, range, dishwasher, and microwave together, typically costs $2,500 to $6,800 installed.
Layout Changes
Moving plumbing or gas lines to change your kitchen’s layout adds real cost. That’s because opening up walls and doing extra work behind the scenes. Even something like upgrading an electrical panel to support a new layout can add $800 to $1,000 on its own.
Permits
If your kitchen renovation includes plumbing, electrical, or structural work, then you need a permit from the city. There are different fees for permits, but if you skip this step, it could be hard to sell your home later.
DIY or a Licensed Contractor: What’s the Real Cost Difference?
Doing the work yourself may seem cheaper at first, but it can end up costing more if mistakes happen or work needs to be redone. Here’s how the two most common routes actually compare:
Doing It Yourself
DIY can genuinely save money on cosmetic work like painting or simple flooring. In many cases, DIY can cost 40 to 60 percent less than hiring someone. But electrical, plumbing, and structural work are different. A small mistake in those areas can end up costing more to fix than hiring a professional from the start.
With a Licensed Contractor
Hiring a licensed contractor usually costs more upfront than doing the work yourself, but it can help you avoid bigger problems and extra costs later. That’s where Durabilt GC comes in. We have one accountable team that handles the project from start to finish. We’re fully licensed and understand local building codes. This helps us avoid costly mistakes on your kitchen remodeling project.
Get a Free, Itemized Estimate
As you can see, the final cost of a kitchen renovation can change depending on the size of the space, the materials you choose, labor costs, and how much work you plan to do yourself. Because every kitchen is different, that’s exactly why no single price fits every kitchen. The only way to get an accurate figure is with an itemized quote based on your actual space, and we can give you exactly that.
Durabilt GC offers free estimates for every kitchen renovation project in Staten Island. To get it, call us today at (917) 378-7701 or fill out our contact form for an honest and no-obligation quote.
Frequently Asked Questions
For a 10×10 kitchen, you can usually expect to spend around $20,000 to $50,000. The final price depends on the cabinets, countertops, flooring, finishes, and how much labor the job needs.
Kitchen renovations usually cost around $150 to $250 per square foot. The price can go up or down depending on the materials you choose and the amount of work your kitchen needs. For a more accurate cost, it’s best to get a written quote based on your actual kitchen.
Yes, online calculators can give you a rough idea of what your renovation might cost. Just keep in mind that they can’t factor in everything, like your kitchen’s layout, plumbing, or local labor costs. For a more accurate price, it’s best to get a written, itemized quote after an in-person visit, which is always more accurate.
Not usually. Most renovation quotes cover labor, cabinets, countertops, and flooring. Appliances priced separately unless you specifically ask for them to be included.
Active construction on a kitchen renovation usually takes 6 to 12 weeks, depending on the scope of the project. When you include planning, permits, and material ordering, the full process often runs 3 to 6 months from start to finish.
